Medical Gas Pressure Reducer Meter Outlet Male Thread G5/8-14

Features: Made of high-quality zinc alloy material, it is durable and not easy to damage. The inhaler has precise flow and is easy to use and sae. Provides constant constant pressure and flow of for the patient to use. This product is not easy to rust and has a long service life. It is mainly used in the supply system of the medical center for the first-aid supply and -deficient patients in the medical unit for inhalation, scientific research institutions, industrial and mining, etc. Specifications: Condition: 100% Brand New Material: Zinc Alloy, Chroe Plating Input pressure: <15Mpa Output pressure: 0.25Mpa Flow adjustment range: 1-10L/min Sety valve: 0.5Mpa automatic exhaust Imported thread: G5/8'' Export thread: M12x1 Use: It is mainly used in the supply system of the medical center for the first-aid supply and -deficient patients in the medical unit for inhalation, scientific research institutions, industrial and mining, etc. The inhaler has precise flow and is easy to use and sae. It is an essential equipment for therapy in emergency rooms and wards of hospitals. Working Principle: The role of the inhaler is to provide continuous constant pressure and flow of for the patient to use. The bottle-inserted inhaler uses the self-contained pressure reducing device to reduce the high pressure in the cylinder (15Mpa pressure at the full bottle) to the low pressure (0.2~0.2Mpa) suitable for human body use, and then output it to the human body after being wetted by water. . The wall-inserted inhaler has an input pressure of 0.2 to 0.4 MPa, so it is not necessary to decompress and directly output to the human body. Operation method: 1. Add distilled water to the humidification cup. The water level in the bottle should not be higher than the water line, but it should not be lower than the water line. It is forbidden to replace with saline. 2. Before inserting the inhaler into the supply terminal socket, first turn off the flow adjustment switch, and adjust the direction of the quick plug, then insert the quick plug into the supply terminal socket hole, when you hear the "click" sound and see the supply terminal. When the locking sleeve of the socket is automatically slid, the quick plug and the supply terminal socket are connected and locked. 3. Insert the pipe into the supply joint before supply, then turn the flow adjustment switch counterclockwise to open the origin, so that the float slowly rises (the scale line aligned with the center of the float is the flow reading, the unit is liter/min) The supply can be adjusted as needed. 4. During the supply process, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, the humidified bottle body should be unscrewed, and distilled water should be added according to the requirements of the first paragraph of this item. Screw on the inhaler bottle and continue to supply . 5. When the inhaler is stopped, the inhaler air supply should be turned off; if it is necessary to remove it, hold the inhaler with your hand and remove it afterwards (the method of unlocking the different supply terminal sockets is explained by the engineering installation unit), then After washing and disinfecting the water in the bottle, store it in a non-corrosive and well ventilated room. Package list: 1 * Medical Machine (Gas Cylinder + Gas Meter) 1 * Instruction Manual 1 * Tube